Group: Members
Posts: 2473
Member No.: 10908
Joined: January 25, 2016
I stayed away from the cross members as I don’t haul a ton of weight really. 30 lbs maybe. My ABS side pipes are screwed directly into the side of my sled so no need for grip tape here. I wanted to be able to use the sled with or without the skis and for it to fit into anything easily for transport.
Group: Members
Posts: 172
Member No.: 10778
Joined: January 21, 2016
Nice smitty! Mine is the wooden version, similar to the one pictured but instead of 2 pieces of wood I have a 24” X 32” board on top. Comes apart and i have 2 Home Depot containers on top. All in about $20 (wood and board I had at home), skis I actually got free from a shop that sells skis. Just asked them for something old they had that was going to get tossed out. Those black sleds are impossible to pull in deep snow. I find far more storage in my two bins as opposed to the sled. I will post a pic tomorrow
Group: Members
Posts: 734
Member No.: 8483
Joined: January 19, 2015
I noticed you guys all use downhill skis for your smittys. I salvaged a pair if cross country skis from a friend to make one and was wondering why downhill seems to be the preference? Would it be the width floats better with the weight? Or maybe the length is easier for transport? Great job on the builds guys just looking to see if i should start mine with x country skis or find downhill skis first? Thanks and tight lines!
Group: Members
Posts: 577
Member No.: 8626
Joined: January 24, 2015
Downhill are a bit wider but mostly seem to hold up a little better when going over some of the crap at the launches. My last smitty was on cross country skis and it was fine.
Group: Members
Posts: 734
Member No.: 8483
Joined: January 19, 2015
QUOTE (browns @ Feb 03, 2018 - 10:32 am)
Downhill are a bit wider but mostly seem to hold up a little better when going over some of the crap at the launches. My last smitty was on cross country skis and it was fine.
Group: Members
Posts: 71
Member No.: 3665
Joined: February 19, 2013
Hey fishon2, great job. You may wish to consider attaching your pulling rope to your skis, not to the sled. It may give you a bit more leverage to pull through deep snow.
Group: Members
Posts: 2473
Member No.: 10908
Joined: January 25, 2016
Looks great fishon2.
Second attaching the rope to the skis. It helps big time as the leverage point is lower on the ski tips than having it on the sled. Easier to pull. In addition if the skis do somehow stick in slush you want to be pulling directly from the skis as it won’t stress the ABS frame.
Ultra cheap, Smitty Sled. 
