DIY Forum
 Members |  Forum Rules |  Search
Pages: 1 2 3   ( Go to first unread post ) Reply to this topicStart new topicStart Poll

> Folding ice hut build, Work in progress
Topic Options
jignhookz
Posted: Dec 18, 2022 - 04:59 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
My goal is light weight and too fold down from a base wall. I have sacrificed on weight in some areas so far but I will try to keep it sub 400 lb. Rough dimensions will be 7.5x4x6 LxWxH fold down dimensions are 7.5x4x3 or in that area.
The base is on 2x10 PT with skis underneath. The joists are 2x4 PT and cedar hung between the 2X10 with joist hangers. The floor is 1/2 inch PT plywood with 1 inch insulation glued and foamed around to secure to the bottom of ply.

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 18, 2022 - 05:00 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Pic

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 18, 2022 - 05:01 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Foam under plywood floor.

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 18, 2022 - 05:03 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Foam board installed with PL foam glue and spray foam between edges.(cut foam short to allow room for spray foam).

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 18, 2022 - 05:05 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Knee walls getting installed. Top walls will be on hinges too fold down.

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 18, 2022 - 10:28 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Started putting foam in the wall cavities. I'll
Do more work on it soon and post updates.

Attached Image
PMEmail Poster
Top
Fisherman
Posted: Dec 19, 2022 - 11:32 am


World Record Trout
*

Group: Members
Posts: 3716
Member No.: 25
Joined: February 10, 2011
That looks like it will last quite a few years, nice work.

PM
Top
Garvdarb
Posted: Dec 23, 2022 - 10:48 am


Fry
*

Group: Members
Posts: 40
Member No.: 13880
Joined: March 08, 2017
I'm looking forward to your next steps and photos.

PMEmail Poster
Top
jignhookz
Posted: Dec 23, 2022 - 05:02 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
It's a slow go. This is something I have wanted to build for years and I'm taking my time but making progress. I ripped my top plates for a 2/12 roof pitch and put together the first top wall. I set the height to just above my head on the lower wall that was just installed. The next wall will have the roof hinged too it.
Thanks for the replies!

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 27, 2022 - 04:00 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Working away slowly. I put 2 plexiglass windows in the second wall put up. I need to rip some more studs for the roof and side walls. Dam cedar is pricey.
To much snow is falling. It could be interesting getting a hut out this year.

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 27, 2022 - 04:01 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Door side.

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 31, 2022 - 09:16 am


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Done some work on it.
I am looking at putting on a top rim of aluminum roll flashing on one wall. If get it installed I can put hinges on the top to hold the wall and roof together.
I have not found the sort of latching toggle clamps in store so I may need to order them for easy set ups. They will make the final connections.

I want to run the tin horizontally for good lapping at seams. Will caulking be enough to hold it together between the 24 inch centre studs?

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 31, 2022 - 06:23 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Adding tin and doing some stain work.

PMEmail Poster
Top
jignhookz
Posted: Dec 31, 2022 - 06:24 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Tin

Attached Image
PMEmail Poster
Top
jignhookz
Posted: Dec 31, 2022 - 06:25 pm


Lunker Trout
*

Group: Members
Posts: 398
Member No.: 10427
Joined: January 08, 2016
Deck stain on roof.

Attached Image
PMEmail Poster
Top
« Next Oldest | DIY | Next Newest »

Topic Options Pages: 1 2 3  Reply to this topicStart new topicStart Poll

 


Berkley Power Bait Panfish Nibbles
Cordell Wally Diver Triple Threat
Piscifun Ultralight Spinning Reel

Magic Bait Crappie Bites
Mr Crappie Slab Daddy
Crappie Magnet White/Chart

Power Pro Braided Fishing Line
Custom 3D Fishing T- Shirts
Humminbird HELIX 5 CHIRP GPS G3
Lake Simcoe Outdoors - Fishing Forum : Fishing Tips, Current Conditions, Fishing Reports & more! Fishing Lake Simcoe & Area
Site Home | Fishing Lake Simcoe | Outdoors Forum | Hunting Forum | Forum Rules | Terms & Conditions |
Powered by IP Board © 2003  IPS, Inc.
Copyright © 2011 Lake Simcoe Outdoors - Fishing & Hunting Online Communities - Register Today - www.LakeSimcoeOutdoors.com. All rights reserved.